With the rapid development of technology in our lives more and more devices, including our emergence pressurized mixer, pressurized mixer appear in our industrial development still play a very big role, so that we do not underestimate our pressurized mixer appeared, then the following small series to give you a brief talk about our mixer when using pressurized note it matters! The role of insulation timing detection circuit, the time to tell the contents note warning signs on the machine. 2, when the moving parts and the mixing chamber blocked, not by hand or iron rods inserted into the inside, but with a plastic stick to careful disposal. 3, touch hot parts, please be careful not to scorch. 4, showing the ring seal leaking powder or screamed, first of the four cap screws evenly loose and then screwed into some of the material and then add some oil or oil in the mixing chamber of the rotor gap, then idling 3- surrounding five minutes along the edge with a hammer in a stretched spring sealing ring gland gently tap a couple of buttons, such as leaking powder also stretched spring and then adjust the tightness of the individual, if the sealing ring gland and the mixing chamber side very close to the sink to clarify when board inside the seal ring has been worn, replace demand from scratch, replace the seal ring clarify way to see the book. 5. Special Note: Check each day before starting the gear oil, engine oil, butter oil level and smooth the situation, strengthen every note the triplet oil cup oil level not less than half, and the timing of the observed changes in the triplet state of the oil level, not excessive fuel consumption or fuel are abnormal appearance (To conditioning knobs triplets), the new machine to replace the gear oil at the latest six months, the site increased activity at least once a week, lubricating oil, when oil fuel shall not exceed half of the mirror, Otherwise, oil spills will occur.